DINBLOC

The Dinbloc End Suction Pump is the close coupled version of the acclaimed Dinflow range. All Dinbloc Pumps use standard "off-the-shelf" TEFC foot and flanged motors and are particularly suited to confined spaces where long coupled units may not fit.

These pumps eliminate costly couplings and the alignment problems sometimes associated with long coupled models. In adition, users have the choice of a range of construction materials, pump discharge positions and a large operating range.

Dinbloc End Suction Pumps are designed and engineered to be easily serviced with their back pull-out design. This allows removal of the motor/impeller module without disturbing pipework.

APPLICATIONS

DINBLOC DESIGN FEATURES

Standardised Design

Close Coupled Motor Pumps have a cost saving advantage over traditional long coupled centrifugal pump and motor sets.

Operating Temperatures

With standard Mechanical seal - minus 20°C to 100°C. Mechanical Seals are available for applications outside these limits.

Operating Pressures

Maximum operating pressure 1600kPa. Maximum test pressure up to 2100kPa. (Maximum pressure will vary depending on particular pump model - higher rating available on application).

Maximum Speed

Maximum direct coupled speeds for Dinbloc pumps vary between 2900 RPM and 1450 RPM, depending upon pump size.

Back Pull-Out Design

All Dinbloc pumps incorporate the "Back-Pull-Out" design allowing the removal of the complete rotating element without disturbing the pipework. This feature enables quick and simple maintenance to take place.

Unit 7, Network Park, Duddeston Mill, Saltley, Birmingham B8 1AU

Tel: 0121 503 3000   Fax: 0121 503 3002

E-mail Us: sales@bhampumps.co.uk

Birmingham Pumps Homepage | About Birmingham Pumps | Pumps | Dinbloc Pumps | Gusher Pumps | Filters Birmingham Pumps Product List | Maintenance | Contact Birmingham Pumps | Beresford Pumps